Operating manual
Follow these steps below:
Step 1: Prepare before washing
Before washing sort your clothes according to temperature and instructions determined by fabric manufacturer. Check all the pockets, pocket to remove materials such as nails, screws, needles or other objects could damage to ... machines and clothes during washing. Upside left the sleeve. Should the laundry mix of small size with the large size of laundry to wash high quality.
Step 2: open the door
Use a strong hand rotate the handle down to open
Step 3: Put clothes into washing machine
Cleaning cloth need to put inside cleaning cloth weight does not exceed the capacity of the washing machine (preferably to 80% capacity of the washing machine). Do not wash with a load exceeding the load of laundry, cleaning if the load exceeds the quality will not be good wash.
Step 4: Close the door
Use a strong hand rotate the handle upward to close the door. Before you start cleaning must make sure that the door is closed.
Step 5: Select right washing program
Choose one of these programs and the best available room corresponding to the fabric and the fabric temperature compatibility (P1 ~ P16).
P1: Fabric trang90ºC / 194F
P2: white cloth / fabric color 60ºC / 140F
P3: white cloth / fabric color 30ºC / 86F
P4: white cloth / fabric color water wash often
P5: Synthetic yarn hop60ºC / 140F
P6: Synthetic yarn water wash often
P7: Wash lightly nhang40ºC / 104F
P8: Wash gently with plain water
P9: water washing wool fibers often
P10: Cleaning cage machine
P11: Quick Wash often with water
P12: Wash nhanh40ºC / 104F
P13: Wash nhanh60ºC / 140F
P14: Quick Wash gently
P15: Squeeze dry
P16: Squeeze fast
Step 6: Pour in detergent and other booster like fabric softener
Pour in suitable detergent in tray in front or at the side of the washer extractor depending on the cleaning program.
|
F
|
Tray for pre-wash |
|
G |
Tray for washing |
|
H
|
Tray for softener
|
|
I
|
Tray for bleaching
|
Notes: Must bring on detergents before starting a wash cycle
Step 7- Run wash cycle (START)
When you press the START program will pause, if press START again to continue program activities. If the program is in recording mode it can not pause the machine so if in this mode, press the START key will have no effect.
Step 8- End wash cycle
Note: click on the "PLAYLIST" on the top left corner to select all VIDEO AS REFERENCES or Press "Next" to view the next video